BTCM-150EMT-304ZP
OUR PORTFOLIO
800-367-3678
literature LITERATURE
catalog CATALOG
0
Product Search
    Secure Checkout
    Base Mount Coupling 1 1/2” Pipe Size, EMT

    Thumbnail Filmstrip of Base Mount Coupling 1 1/2” Pipe Size, EMT Images

      Purchase Base Mount Coupling 1 1/2” Pipe Size, EMT

      Base Mount Coupling 1 1/2” Pipe Size, EMT

      Part Number: BTCM-150EMT-304ZP
      • Description

      CSDBMC Base Mount 1 1/2” Pipe Size: for attachment use Shielded Rod, a solid rod with threaded end(s) or an all thread rod. Part number: BTCM-150EMT-304ZP, fit: anchor/tight.

      Applications:

      • Cleanrooms and mechanical areas; not limited to: biotech, pharmaceutical, food processing, beverage, dairy, cosmetic, chemical, water treatment, and semi-conductor industries.
      • Low flow & low pressure systems with moderate vibration: WFI, SIP, CIP, process, utility & instrument lines, WFI, SIP, CIP, process, utilities & instrument lines

      Materials:

      • 304 and 316 stainless steels
      • ZERO PUDDLE inserts are FDA grade silicone rubber

      Specifications:

      • Intermittent temperatures from -40F to 320F
      • Continues temperatures from -20F to 302F

      Product Data
      Fit:  anchor/tight
      H:  2.69
      L:  2.99
      Line OD:  1.74
      Material:  EMT
      Pipe Size:  1 1/2”
      Round Coupling Height:  0.47
      Round Coupling Thread:  3/8”-16
      Tube Size:  -
      W:  0.88
      cl:  1.25
      Features & Benefits

      Features:

      • Reduced OD allows hanger to be encased under the insulation’s jacket
      • ZERO PUDDLE Silicones inserts raised geometry facilitates drainage of liquids on vertical/riser lines creating maintenance uptime.
      • There are no exposed threads or openings

      Benefits:

      • Guides loose fit allow the line to freely expand and contract during thermal cycling, preventing undo stress to welds
      • Hanger’s threaded section is elongated, increasing the housings elevation adjustment aiding in slope alignment
      • Insulation Envelope “IE”: Reduced OD allows hanger to be buried under the insulation jacket
      • Insulation Thickness: Line’s ODs are Encased Under Insulation
        • 1.0” of insulation : 1/2” Tube (0.5”) to 3” Copper (3.125”)
        • 1.5” of insulation : 3” Pipe (3.5”) to 4” Pipe (4.50”)
        • 2.0” of insulation : 6” Tube (6.0”) to 6” Pipe (6.625”)
      • There are no exposed threads or openings in hardware plates
      • All plates are cleaned polished
      • Hanger threads match MSS 69 rod OD requirement