Campbell Cobra Part C-locking handles (with ferrule interlock)
How To Order from Campbell Fittings
Campbell Cobra Part C-locking handles (with ferrule interlock)

    Recommended Use:
    • Multi-purpose liquid, chemical, bulk handling
    Recommended Hose Attachments:
    • Interlocking ferrules
    Features and Benefits:
    • Designed for use with campbell Interlocking Ferrules.
    • 360° interlock groove on fitting locks ferrule into place for the ultimate in holding power.
    • Shank and ferrule lengths are matched for performance and avoid potential hose tube or hose cover damage.
    • Serrations designed to grip, seal, and protect hose when crimped. Note: Traditional "two bump" designs are for banding, not crimping. NAHAD and Campbell do not recommend crimping on "two bump" shanks.
    • Crimped assemblies are low profile and eliminate sharp edges from clamp buckles.
    • Couplings and Goodyear Instalock Cam & Groove Couplings to keep your inventory as flexible as possible.
    • Designed to couple and interchanging made to ASTM F1122, CID A-A-59326, MIL-C-27487
    Special Features:
    • Locking handles can be purchased assembled onto the coupling or as a kit and retrofitted onto existing inventory…another easy and cost-effective way to keep inventory flexible
part number weight hose size price add single
CL-AL-150C 0 1-1/2 $65.36
CL-AL-200C 0 2 $71.35
CL-AL-300C 2.2 3 $88.09
CL-AL-400C 0 4 $98.63

316 Stainless Steel